-
AVR Studio 4/AVR32 Studio/AVR Studio 5/Atmel Studio compatible
-
USB Interface to PC for programming and control
-
Powered from USB bus or from an external 10-15V DC power supply
-
Adjustable target VCC (0-5.5V)
-
Two adjustable reference voltages with high accuracy. (0-5.0V, 10mV res)
-
Clock oscillator, adjustable on the fly from Atmel Studio (0-50MHz, 0.1% res)
-
Serial In-System Programming (ISP) of Atmel tinyAVR and Atmel megaAVR devices
-
PDI Programming of Atmel AVR XMEGA devices
-
JTAG programming of megaAVR, AVR XMEGA and AVR UC3 devices
-
aWire Programming of AVR UC3 devices
-
ISP and JTAG programming of AVR devices in external target systems
-
Flexible routing and socket card system for easy mounting of all supported devices
-
8 push-buttons for general use
-
8 LEDs for general use
-
All AVR I/O ports easily accessible through pin header connectors
-
Expansion connectors for plug-in modules and prototyping area
-
On-board 2Mbit Dataflash for non-volatile data
-
USB mini-AB (On-The-Go) connector for AVR devices with USB
-
PHY and DSUB-9 connetor for RS232 interface
-
PHY and DSUB-9 connector for CAN bus
-
PHY and header for LIN bus
-
Device board with an ATmega2560 AVR microcontroller is included.
Note
Socketcards and routingcards must be bought separately.